가공 후 인쇄 및 염색 가공은 직물 흡습성, 부드러움, 광택, 크기 안정성, 염색 견뢰도 개선 등과 같은 모든 종류의 섬유 고유 성능을 개선하고 재생하는 데 중점을 두는 두 가지 측면으로 요약할 수 있습니다. , 특정 마무리 (예 : 스텐 터, 수축, 롤링 라이트 등)를 통해 모든 종류의 섬유의 우수한 특성이 완전히 표시됩니다. 다른 한편으로 섬유에 난연제, 방수, 곰팡이 및 나방 저항, UV 저항, 쉬운 얼룩 등과 같은 새로운 성능을 부여하는 데 중점을 둡니다. 이러한 특성은 모든 유형의 섬유에서 사용할 수 없으며 마무리를 통해서만 얻을 수 있습니다. 원하는 결과.

일반적으로 전자의 마무리를 일반마무리라 하고, 후자의 마무리를 특수마무리 또는 기능성마무리라 한다. 현재 후자의 마무리 유형이 크게 증가하여 마무리의 중요성이 충분히 드러났습니다.

그레이 패브릭은 염색을 하지 않고 섬유를 방적하여 패브릭으로 만든 반가공 제품입니다. 염색 및 가공 회사에서는 종종 익지 않고 탈사된 회색 천을 원시 회색 천으로 지칭합니다. 익혀서 발호한 천을 익힌 천이라고 합니다.

The fabric formed by the yarn after weaving or knitting in a textile mill or knitting factory is generally referred to as grey fabric. As a semi-finished product in the textile and clothing processing process, the fabric is processed in dyeing and finishing plants for pre-treatment, dyeing, printing and finishing to achieve a certain appearance, feel and functional requirements before it can be used as clothing fabric or enter the textile distribution market. We refer to the pre-treatment, dyeing, printing and finishing of fabrics as a series of processes, which are collectively referred to as dyeing and finishing.

Most cotton fabrics are printed using reactive dyes. Improving the success rate of cotton reactive printing and controlling the colour difference within a reasonable range are important for improving production efficiency, saving energy and reducing production costs significantly. This paper summarises and analyses the factors that can easily cause colour difference in the production process according to the production practice and gives the corresponding control measures.

The general dyeing and finishing process is as follows：
Cloth preparation → head sewing → drop tank boiling and bleaching → dyeing → soaping → colour fixing → soft → out of the tank → dewatering → dry cloth, while the formation of fine wrinkles is mainly in the dyeing tank, in the dewatering machine, in the pile cloth car ….
Because a meter of cloth from the yarn to the finished product, after too many links, each link quality control is not done well, there is a risk of producing substandard fabrics.

Knitted fabrics because of its fabric characteristics, so the operation in the printing production process, necessarily with the woven fabric printing production process, there are relatively large differences and different. Reasonable and correct printing operation is to ensure and improve the quality and yield of knitted fabric printing key.

After finishing is to give the fabric to color effect, form effect (glossy, suede, brace, etc.) and the actual effect (impermeable, not felt shrinkage, non-iron, not moth-eaten, flame resistance, etc.) of the technical treatment, fabric finishing is through the main chemical or physical method to improve the appearance and feel of the fabric, enhance the performance or give special features of the process, is the textile “icing on the cake” process.

Printed fabric in the apparel industry is a large category, the following links and processes can be devided to many process and relative process, this time I will list the usual we use in gereneral to do a post and share out

Today I came to discuss with you the content of which fabrics are suitable for digital printing, in the textile digital printing industry, there are some textiles meet printing machine nozzle will appear off line, causing damage.

Today we bring some characteristics of cotton and linen fabrics, common quality problems and causes, what are the prevention methods and repair methods?